HT Panels

3.3KV to 66KV HT Panels offered by us are specially manufactured according to specific need of the present industrial prerequisite.

These are well capable to withstand with harsh industrial environment. Manufactured as per latest industrial standard & expertise, these are highly recommendable and meritorious in their performance. Our Panels are available in very competitive range and can be customized as per client’s specific needs.

Power Control Center ( PCC Panel )

We offer a wide range of PCC panels, which are using for attaining maximum and efficient electric power distribution & utilization. Our Panels are available in diverse specifications and can be customized according to needs of the customer & successfully meet the industries demands. PCC Panels are designed in confirmation with set quality norms, protection and used in wide array of applications. PCC panels are widely used in power distribution in various process and production industries. Further, we ensure that these PCC panels reach the clients destination without in a safe & protective manner. We can design PCC panels based on parameters and service conditions as per the application which follows:
• Single/Multiple Incomer, Bus coupler with necessary interlocking.
• Single/Double bus arrangement.
• Up to 6300A, 65KA breaking capacity.

Auto Synchronizing Panel ( AS Panel )

Synchronizing Panel works between two or more different power sources like DG sets to manage power source in HT & LT supply systems. Synchronization helps in making different DG sets behave as a virtual single unit and eliminates subdivision of total load. It helps in transferring load from one unit to another as during service period, So that the unit requiring service can be easily shut off. In this way the critical load need not be interrupted and there is no production loss. During low load we can run any single unit, and synchronize more units as per the load increases. This can be manual or automatic. Our panels are used for alternator between various diesel generator sets, gas Generator sets and turbine generator sets. We can design synchronizing panels based on parameters and service conditions as per the application which follows:
• Momentary or parallel synchronizing between different power sources.
• DG/Gas generator/Turbine Synchronization.
• Captive Power Plant Synchronization.

Auto Mains Failure Panel ( AMF Panel )

We manufacture a wide range of AMF panels. These are incorporated with automatic engine start-stop and changeover the power source. Our panes are made with electronic controller, relays & contactor logic. Our Panels are available in diverse specification and can be customized according to needs of customer. These panels are available with several functions, protections and timers that enhance their functioning capacity.


We manufacture highly efficient LT bus duct with a capacity up to 6300A, 690V. This is offer with both indoor and outdoor construction with IP42/55 degree protection. This type of bus duct are offered in aluminum/copper based and manufactured as per the International standards. The bus systems are based on design parameter and service conditions as per the application of bus ducts which follows

• Non-segregated/segregated/Isolated Phase, Cross over chamber, Vertical/horizontal.
• Bus duct calculation for designing carrying conductor, heating effects, thermal effects, electro dynamic force, Voltage drop
• Skin & proximity effects in the terms of bus bar reactant, etc…

Control & Relay Panel

We manufacture control and relay panels of generator, transformer & feeder protection, which is innovative and is available in different models as per our client needs. Our panels are available in a range from 6.6KV to 66KV. We use latest controller and protection relays for reliable and durable solution. We give total package for power management by single step.


Motor Control Center ( MCC Panel ) / Intelligent MCC

MCC panel is design to meet a specific requirement of controlling electric motor. All the working parameters of an electric motor are taken in to account while designing MCC. An automatic or manual control are fitted on to the MCC panel to stop or start a motor, to regulate speed, to have reverse or forward alternation, to regulate the power and to prevent the electric motor from hazards of overloads.

We are instrumental in offering a wide range of MCC panels that are highly demanded in the market for a variety of motor control processes. Owing to their excellent performance and minimum maintenance, our products are widely demanded in various industries like chemical refineries, pharmaceuticals, textiles, construction, paper and others. MCC panels are fabricated in standard as well as customized sizes meeting all the diversified needs of our clients. Our MCC panels are designed and manufactured using advanced technology which makes them stand in international markets.

Auto Power Factor Correction Panel (APFC Panel )

Electrical loads that are usually influential in nature could heavy loss in case of power cut offs. Such installations include heavy machines, drives, air cooling plants and motors installed in commercial and industrial units. Such kind of loss in power can create chaos if the production unit is not able to meet deadlines. They are bound to pay penalties in certain cases. To overcome such kind of power loss, APFC panel can be installed to control capacitors used for maintaining high power factor in accordance with variation of load in production unit.

We provide a wide range of APFC panels, which is designed and manufactured in compliance with various industrial guidelines & standards. These panels are appropriate to enable automatic maintain of power to a system. Our range of APFC panels is renowned for its excellent performance, safe usage & high efficiency and also offered in customized forms as per the specifications of our clients. Features of our APFC panels are:
• Designed to make sturdy for longer life & breakdowns.
• They are economical with ability to maintain constant high power factor along with faster payback period.
• Fitted with spares that are made using advance technology to meet international industrial standards.

Variable Frequency Drive (VFD Panel ) / Soft Starter Panel

We are one of the premier organizations engaged in manufacturing and supplying a wide range of Variable frequency drive panels & Soft starter panels. These panels play an important function in squirrel cage induction motor control application. Our expert professionals stringently test these on various parameters to ensure nothing but the best is supplied to the clients.

We are offering these panels in various specification and effectively used in various industrial applications. Our quality analyst test these on defined quality parameters, to ensure these are in compliance with the defined quality standards.

Draw out Panel

In every modern industry, reliable electrical systems are must to reduce the production downtime & improve efficiency. Customer will option for draw out panel. Panel is designed to provide fool-proof control for the motors that are installed in the many process industries viz. fertilizer, petrochemical, cement, oil refineries, chemical plants, steel plants, power stations, material handling plants & other continuous process plants where in the continuous flow of power without the interruption.

Apart from power, control draw out contacts will be provided to suit the need of interlocks. Up to 2000A Incomer draw out type panels are mfg. in draw out modules.


Feeder Pillar Panel

Our range of feeder pillars have achieved appreciation in the domestic market for superior quality standard as is gauged by repeat orders from existing clients and fresh ones from new clients.

These feeder pillars designed with the aid of our cutting edge technology are widely used across numerous industries for rigid construction, optimum performance and high efficiency.

Power Distribution Board (PDB )

We offer PDB panels. Our exclusive gamut of power distribution board is available with the specific requirements of the clients. These distribution boards are specially designed, wired, tested and assembled with different electrical equipment. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness. Also, it is helpful in saving the installation cost, cost of equipment storage, handling and field testing customization provision is also offered on these panels. Features of our PDB are:
• Varied enclosure options available with Pole configuration SP/N, DP, TP & TP/N.
• Hinged cover on all enclosures.
• Option of door interlock & external handles are pad-lockable in off position.

Lighting Distribution Board (LDB )

We are engaged in manufacturing of qualitative Lighting Distribution Board. These integrated panels are available in numerous sizes and specifications for catering varied requirements of lighting in office & industries.

Our LDB consists of three basic components such as main breaker, main GFI (Ground fault interrupter) and MCB or the breakers for controlling the various lines of lighting. In addition to these, our clients can also avail other components according to their requirements. Due to high quality raw material used in their construction, our electrical panels are known for their performance, reliability and durability.

Fire Fighting Panel (FFP )

We design special control panels for usage in different types of fire fighting systems. These can be tailor-made as per the particular needs of the application and the specifications provided by the clients. Our control panels systems are perfect for all types of HP. This type of control panels are used to keep the fire fighting pumps battle to ready in case of fire breakout.
Fire pumps may be powered either by an electric motor or a diesel engine or a very occasionally a steam turbine. We take pleasure in accomplishment. We are offering premium quality of fire fighting panel that in manufacturing using latest technology of PLC. Our equipments comprise Jockey pumps, Main Engine pumps and they all are connected through diesel. Engine start relay and engine interlocks are covered properly.

PLC Panel

PLC panel are designed to control electrical power supply using programmable control logic processor. The processor fitted into the panel structure is connected through wires with reed switches, push buttons and proximity detectors to its inputs cards. And the same processor is also connected to motor contactors, indication lights and control relays which are the output field devices through wires.
PLC panels are commonly called automation panels and are widely used in industrial automation process, continuous and processing unit. Small to big manufacturing units use these

PLC panels to control the production line. PLC panels are also popular in automobile and electronics manufacturing units. Keeping in mind the need of industries, we have fabricated a range of high quality PLC panels with some salient features:

• We are providing PLC, HMI, SCADA with software development services.
• We use optimum quality components for engineering this range, which are procured from authentic vendors of industry.
• Our range conforms to all the industry standards and is available in specifications mentioned by our clients.
• PLC panels are designed to easy monitoring and controlling which makes process error free.
• PLC panel is fitted with high capacity processor which gives reliable performance.

Control Panels

We provide all types of control panels (MS or SS) with electronic Instruments, PLC, Communication setup, Energy Meters, Load Controlling and other user requirements.

• Street Light Distribution Board
• Dyeing Panel
• Furnace Panel
• Annunciator Panel/Fault Alarm Panel
• Dosing Panel
• Boiler Panel
• Loom Panel
• ETP Panel
• Temperature Panel/Heater Panel
• Machine Control Panel